-This tutorial I am dedicated to users who want to replace the Galaxy Y Firmware Android device. This tutorial I also specialize to the cutom Install Rom but experienced failure, solution would be to return it to origin you have to flash its firmware.
Ingredients you need to prepare:
Ingredients you need to prepare:
1. Data cable (USB)
2. PC (Computers).
3. His hp should be there, if not there to buy first : D
4. Download Firmwar here I think the most recent firmware.
5. Download Odin3_v1.85+pit here. Odin for flashing firmware is software that is used on a PC (computer).
6. SAMSUNG USB DRIVER download here
II. Unzip the file Odin3. then run by doble click on the extension Odin (see picture):



IV. Once out on the phone screen Android warning, continue to press the volume up then the screen will change as shown below:

V. Now plug the USB cable from PC to Hp, and see Odin who had been on the run it out the yellow signs do not like this picture, if baseball is not yet able to follow this tutorial, customarily failure to connect the hp Same PC as the Samsung USB driver is not installed, so was read the first tutorial of the above. Okay. (see Figure):

Then enter the firmware was downloaded earlier, extract it, because the file is in rar file downloaded earlier, then input the firmware:
PHONE : MODEM_S5360XXXXX_REV05.tar.md5CSC : GT-S5360-MULTI-CSC-OXXXXX.tar.md5
BOOTLOADER: DefaultCalDataWithBoot_S5360XXXXX_REV05.tar.md5PDA : PDA_S5360XXXXX_REV05.tar.md5
And at the PIT, the input file “totoro_0623.pit”

Sekarang klik Statar :

Waiting Flashing lived most also 2 Minute Walk. if you've managed to sign a case of this, in the green box out warning PASS. Congratulations you have successfully Following Tutorial on"Flashing Firmware Samsung Galaxy Y GT-S5360"

i have bootloader were can i download ?
ReplyDeletedownload with pc brow
ReplyDeletehow to download the
ReplyDeletefiles like modem, csc etc.