Friday, 13 September 2013

How to Firmware / Flashing GALAXY Y

-This tutorial I am dedicated to users who want to replace the Galaxy Y Firmware Android device. This tutorial I also specialize to the cutom Install Rom but experienced failure, solution would be to return it to origin you have to flash its firmware.



Ingredients you need to prepare:

1. Data cable (USB)
2. PC (Computers). 
3. His hp should be there, if not there to buy first : D
4. Download Firmwar here I think the most recent firmware.
5. Download Odin3_v1.85+pit here. Odin for flashing firmware is software that is used on a PC (computer).
6. SAMSUNG USB DRIVER download here

I. Start the first step, first install the Samsung USB drivers on your PC agan must succeed.

II. Unzip the file Odin3. then run by doble click on the extension Odin (see picture):


Flashing Firmware Samsung Galaxy Y GT-S5360

III. Now turn off / reboot your android phone, wait until the phone is completely dead. If it is then now Press BUTTON, HOME + POWER + VOLUME DOWN (volume down):
Flashing Firmware Samsung Galaxy Y GT-S5360
Flashing Firmware Samsung Galaxy Y GT-S5360
IV. Once out on the phone screen Android warning, continue to press the volume up then the screen will change as shown below:

Flashing Firmware Samsung Galaxy Y GT-S5360
V. Now plug the USB cable from PC to Hp, and see Odin who had been on the run it out the yellow signs do not like this picture, if baseball is not yet able to follow this tutorial, customarily failure to connect the hp Same PC as the Samsung USB driver is not installed, so was read the first tutorial of the above. Okay. (see Figure):

Flashing Firmware Samsung Galaxy Y GT-S5360

VI. Keep on the id already filled with 0: [COM3] or 0: [COM4] or the other may not be the same as my picture.

Then enter the firmware was downloaded earlier, extract it, because the file is in rar file downloaded earlier, then input the firmware:


PHONE : MODEM_S5360XXXXX_REV05.tar.md5
CSC : GT-S5360-MULTI-CSC-OXXXXX.tar.md5

BOOTLOADER: DefaultCalDataWithBoot_S5360XXXXX_REV05.tar.md5
PDA : PDA_S5360XXXXX_REV05.tar.md5

And at the PIT, the input file “totoro_0623.pit”

Flashing Firmware Samsung Galaxy Y GT-S5360

Sekarang klik Statar :

Flashing Firmware Samsung Galaxy Y GT-S5360

Waiting Flashing lived most also 2 Minute Walk. if you've managed to sign a case of this, in the green box out warning PASS. Congratulations you have successfully Following Tutorial on"Flashing Firmware Samsung Galaxy Y GT-S5360"

Flashing Firmware Samsung Galaxy Y GT-S5360

3 comments: